Grounding Instructions - Clarke Clean Track 12 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

120VAC GROUNDING INSTRUCTIONS
This appliance must be grounded. If it should electrically malfunction, grounding provides a path of least resistance for electric current to reduce the
risk of electric shock. This appliance is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged
into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
DANGER!
This appliance is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug illustrated in Figure 1
below. A temporary adapter illustrated in Figures 2 and 3 may be used to connect this plug to a 2-pole receptacle as shown in
Figure 2 if a properly grounded outlet is not available. The temporary adapter should be used only until a properly grounded outlet
(Figure 1) can be installed by a qualifi ed electrician. The green-colored rigid ear, tab, or the like extending from the adapter must
be connected to a permanent ground such as a properly grounded outlet box cover. Whenever the adapter is used, it must be held
in place by a metal screw. Grounding adapters are not approved for use in Canada.
Replace the plug if the grounding pin is damaged or broken.
The Green (or Green/Yellow) wire in the cord is the grounding wire. When replacing a plug, this wire must be attached to the
grounding pin only.
Extension cords connected to this machine should be 12 gauge, three-wire cords with three-prong plugs and outlets. DO NOT use
extension cords more than 50 feet (15 m) long.
Improper connection of the equipment-grounding conductor can result in a risk of electric shock.
Check with a qualifi ed electrician or service person if you are in doubt as to whether the outlet is
properly grounded. Do not modify the plug provided with the appliance. If it will not fi t the outlet,
have a proper outlet installed by a qualifi ed electrician.
PLEASE NOTE: FOR NORTH AMERICA ONLY
Grounding Pin
FIGURE 1
Adapter
Metal Screw
Grounded Outlet
Grounded Outlet Box
FIGURE 2
FORM NO. 56041658 - Clean Track
ENGLISH / A-3
EN
Adapter
Tab for Grounding Screw
FIGURE 3
12 - A-3
®

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

56265230

Table des Matières