MZ electronic EV-011 Instructions D'utilisation page 24

Starting up
The chain counter features a 3-digit display and two buttons:
The display backlight will switch off 3 minutes after the last command given.
When the instrument is turned on for the first time, it will set up as programmed
in the factory.
The words SET CM will run across the
display screen.
The instrument will set up to count
chain deployment in metres – in 0.5 m
increments up to 99.5 metres and in 1
m increments up to 999 metres.
EV-011 24
English
and
Rev. 11– 2017
.