Bosch IXO Notice Originale page 31

To switch off the power tool, release the on/off switch (5).
Fully automatic spindle lock (Auto-Lock)
The drill spindle, and therefore the tool holder, are locked when the on/off
switch (5) is not pressed.
This allows screws to be driven in even when the battery is discharged and
enables the power tool to be used as a screwdriver.
If the drill spindle is blocked, do not press the on/off switch (5) for
u
longer than 15 seconds. Otherwise, the power tool may become dam-
aged.
Practical advice
Only apply the power tool to the screw/nut when the tool is switched
u
off. Rotating tool inserts can slip off.
Maintenance and Service
Maintenance and Cleaning
To ensure safe and efficient operation, always keep the power tool
u
and the ventilation slots clean.
If the battery is no longer working, please contact an authorised after-sales
service agent for Bosch power tools.
In order to avoid safety hazards, if the power supply cord needs to be re-
placed, this must be done by Bosch or by an after-sales service centre that
is authorised to repair Bosch power tools.
After-Sales Service and Application Service
Our after-sales service responds to your questions concerning maintenance
and repair of your product as well as spare parts. You can find explosion
drawings and information on spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you with any ques-
tions about our products and their accessories.
In all correspondence and spare parts orders, please always include the
10‑digit article number given on the nameplate of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Bosch Power Tools
English | 31
1 609 92A 9KX | (02.07.2024)