Bosch IXO Notice Originale page 25

Never service damaged battery packs. Service of battery packs should
u
only be performed by the manufacturer or authorized service providers.
Safety Warnings for Screwdrivers
Hold the power tool by insulated gripping surfaces, when performing
u
an operation where the fastener may contact hidden wiring. Fasten-
ers contacting a "live" wire may make exposed metal parts of the power
tool "live" and could give the operator an electric shock.
Use suitable detectors to determine if there are hidden supply lines
u
or contact the local utility company for assistance. Contact with elec-
tric cables can cause fire and electric shock. Damaging gas lines can lead
to explosion. Breaking water pipes causes property damage.
Hold the power tool securely. When tightening and loosening screws be
u
prepared for temporarily high torque reactions.
Before any work on the power tool (e.g. maintenance, tool change,
u
etc.) as well as during transport and storage, set the rotational direc-
tion switch to the middle position. There is risk of injury from uninten-
tionally pressing the on/off switch.
Secure the workpiece. A workpiece clamped with clamping devices or in
u
a vice is held more secure than by hand.
Always wait until the power tool has come to a complete stop before
u
placing it down. The application tool can jam and cause you to lose con-
trol of the power tool.
Protect the power tool against heat, e.g. against con-
tinuous intense sunlight, fire, water, and moisture.
There is a risk of explosion.
Product Description and Specifications
Please observe the illustrations at the beginning of this operating manual.
Bosch Power Tools
Read all the safety and general
instructions. Failure to observe the
safety and general instructions may
result in electric shock, fire and/or
serious injury.
1 609 92A 9KX | (02.07.2024)
English | 25