Publicité
Les langues disponibles
Les langues disponibles
1. Door Prep
1/8" Deep
2 1/4"
1 "
2. Standard Strike Plate Door Jamb Prep
Door Thickness (A)
Door Stop
3. Install Strike Plate
Fasten Strike Plate using two #8 x 3/4" wood screws.
2
2 3/8" or 2 3/4"
Backset
2 1/8" Diameter
Bore
1" Diameter Edge Bore
A
B
13/8"
11/4"
21/4"
11/2"
15/16"
21/4"
13/4"
17/16"
21/4"
NOTE: Dimensions B & C should
be used as reference only. Due
to tolerances actual door jamb
prep dimensions will vary. Using
the strike plate outline edges and
locate screw holes on strike with
center line on jamb.
4. Install Latch
Step 1: Place Plastic Alignment tool in bore hole.
Step 2: Insert the latch through the alignment tool.
C
!
ROTATE THE NOSE BOLT SO THAT THE CURVED
FACE WILL HIT THE STRIKE PLATE WHEN
CLOSING THE DOOR.
Step 3: Fasten Latch using two #8 x 3/4" wood screws.
Alignment Tool
Privacy Function:
the threaded hole
for the privacy pin
must be facing the
interior side of the
door.
Publicité
