Table Grill - SEVERIN PG 2367 Mode D'emploi

GB

Table grill

Dear Customer,
Before using the appliance, please read the
following instructions carefully and keep this
manual for future reference. The appliance
must only be used by persons familiar with
these instructions.
Connection to the mains supply
The appliance should only be connected to
an earthed socket installed in accordance
with the regulations.
Make sure that the supply voltage
corresponds with the voltage marked on the
rating label of the appliance. This product
complies with all binding CE labelling
directives.
Familiarisation
1. Warming rack
2. Splash guard
3. Carrying handles
4. Power cord with plug
5. Grill plate
6. Thermostat with indicator light
7. Fat collection tray (at the rear)
8. Rating label (on underside of appliance)
Important safety instructions
∙ In order to avoid hazards,
repairs to this electrical
appliance or its power cord
must be carried out by our
customer service. If repairs
are needed, please send the
appliance to our customer
service department (see
appendix).
∙ Before cleaning the appliance,
ensure it is disconnected from
the power supply and has
cooled down completely.
∙ To avoid the risk of electric
shock, do not clean the
appliance with liquids or
immerse it.
∙ The grill plate and warming
rack can be wiped with a damp
cloth or cleaned with a suitable
soft brush. Dry thoroughly
afterwards.
∙ For detailed information on
cleaning the appliance, please
refer to the section Cleaning
and care.
∙ The appliance is not intended
to be operated by means of
an external timer or separate
remote-control system.
∙ Do not operate the grill with
charcoal or similar fuels.
∙ Caution – Danger of
burns. The accessible
surfaces of the housing may
9