Table Grill - SEVERIN pg-8527 Mode D'emploi

GB

Table grill

Dear Customer,
Before using the appliance, please read the
following instructions carefully and keep this
manual for future reference. The appliance
must only be used by persons familiar with
these instructions.
Connection to the mains supply
The appliance should only be connected to
an earthed socket installed in accordance
with the regulations.
Make sure that the supply voltage
corresponds with the voltage marked on the
rating label of the appliance. This product
complies with all binding CE labelling
directives.
Familiarisation
1. Lid handle
2. Lid opener
3. Glass lid
4. Carrying handle
5. Thermostat with power cord
6. Thermostat socket
7. Ceramic grill plate
8. Fat collection tray
Important safety instructions
∙ In order to avoid hazards, repairs
to this electrical appliance or its
power cord must be carried out by
our customer service. If repairs are
needed, please send the appliance
to our customer service department
(see appendix).
∙ Before cleaning the appliance,
ensure it is disconnected from the
power supply and has cooled down
completely.
∙ To avoid the risk of electric shock, do
not clean the thermostat and power
cord with water and do not immerse
in water.
∙ The grill plate can be wiped with
a damp cloth or cleaned with a
suitable soft brush. Dry thoroughly
afterwards.
∙ For detailed information on cleaning
the appliance, please refer to the
section Cleaning and care.
∙ The appliance is not intended to be
operated by means of an external
timer or separate remote-control
system.
∙ Do not use this appliance with
any other thermostat than the one
provided.
∙ Always connect the thermostat to
its corresponding socket on the
appliance before connecting to the
mains.
∙
The accessible surfaces of the
housing may become very hot during
9