Plancha Grill Plate - SEVERIN ZB 8181 SEVO Mode D'emploi

GB

Plancha Grill Plate

Dear Customer
Before using the appliance, read the
following instructions carefully and keep
this manual for future reference. The
appliance must only be used by persons
familiar with these instructions.
Safety instructions
∙ The SEVO Plancha
Grill Plate must only be
used with grills from the
SEVO range. The safety
instructions for the grill
used therefore also apply.
∙ The grill must always be
cool when the plancha grill
plate is placed on it.
∙ Caution! Always make sure
that the grill has cooled
down completely before
removing the plancha grill
plate.
∙ Never pour water onto the
assembled plancha grill
plate and never immerse
the hot plate in cold water.
∙ To avoid damaging your
plancha grill plate, do not
use any pointed or sharp
objects to remove grilled
food.
∙ Do not use metal scourers
or abrasive cleaning
products to clean the
plancha grill plate.
Before using for the first time
∙ Take the plancha grill plate out of its
packaging and completely remove any
packing materials.
∙ Clean the plancha grill plate as specified
in the "Cleaning and Care" section.
∙ Assemble the plancha grill plate as
described in the "Operation" section.
∙ Heat the plancha grill plate at the
highest setting, with no food on it, for
approximately 10 minutes. A small
amount of smoke may appear. If using
in enclosed rooms, therefore, make
sure there is sufficient ventilation, by
opening windows or patio/balcony
doors, or position the appliance under
an extractor hood.
∙ Afterwards, allow to cool down
completely and clean the appliance
again.
5