Saving The Contents Of The Memories To Disk - Viscount Canticus I Mode D'emploi

     $0-+  
 12 02#"C 5 '2',% #," -$ "'1)  
N.B.: The operation described above overwrites the memory instrument, so if the contents of the voices have been
modified you are advised to save them on disk BEFORE loading the new voices.
When the procedure is complete the instrument returns to the main video page.
"dEr" (disk error) or "Ejt" (eject) on the 3 digit display indicates that the disk is illegible; insert the appropriate disk and
repeat the operations. The "noS" message on the 3 digit display indicates that the disk does not contain any information.

6.3 SAVING THE CONTENTS OF THE MEMORIES TO DISK

As for the voices, the contents of the dedicated or general memories can also be saved to floppy disk and reloaded as
necessary.
To do this, after inserting a formatted floppy disk in the drive, press the SETTING key and then the PAGE
display shows:
    ',2-  C
1#2 "'1) ',    ," .31& R
Now enable recording on the floppy disk drive section of the control panel by keeping the PAUSE key pressed and pressing
REC. The consecutive number of the recording (file) will appear on the 3 digit display and the LEDs of the respective keys
will illuminate.
3 digit Display
PAUSE Key
Ö
When the CURSOR key is pressed, the display requires further confirmation:
    ',2-  C 30# T
.31& R 2- !-,$'0+ -0  2- -02
Press EXIT here to abort the operation or press the CURSOR
drive LED illuminates then the alphanumeric display will show:
    ',2-  C
 12 02#"C 5 '2',% #," -$ "'1)  
When the operation is complete, the display returns to the video page for regulation of the volume levels.
Viscount CANTICUS I - II
Ö
key again to start the saving procedures: the floppy disk
51
×
key until the
REC Key