Loading Memory Contents From Disk - Viscount Canticus I Mode D'emploi

Remember that when a saving procedure is carried out, the data relating to all the memories are saved onto the floppy disk.
The appearance of "dEr" (disk error) or "Ejt" (Eject) informs the user that the disk has not been formatted (see formatting
procedure in point 4.4), while the "dPr" (disk protected) error indicates that the disk inserted is protected against data
writing. In both cases, repeat all the saving procedures.

6.4 LOADING MEMORY CONTENTS FROM DISK

To reload the memory content data into the instrument, insert the appropriate disk and press the SETTING key. Then press
×
the PAGE key until the display shows:
    $0-+  C
1#*#!2    -, "'1) ," .31& R
With the aid of the SONG
instrument on the 3 digit display.
SONG Key
3 Digit Display
Ö
Use the CURSOR key to confirm the selection made. The alphanumeric display will show:
    $0-+  C 30# T
.31& R 2- !-,$'0+ -0  2- -02
Press EXIT to abort the operation or the CURSOR
LED will illuminate and for few moments the display will show:
    $0-+  
 12 02#"C 5 '2',% #," -$ "'1)  
When the procedure is complete the instrument returns to the main video page.
N.B.: Save the memories on disk BEFORE loading from disk, since the new configuration will replace the existing one.
"dEr" (disk error) or "Ejt" (eject) on the 3 digit display indicates that the disk is illegible; insert the appropriate disk and
repeat the operations. The "noS" message on the 3 digit display indicates that the disk does not contain any information.
Viscount CANTICUS I - II
Õ Ö
and keys, select the number of the file containing the memory data to be loaded into the
Ö
key to start the procedure for loading the memory data. The drive
52