Publicité
• If Alarm
is activated, the hours flash on the display.
Select the desired hour using the function buttons +/-
and confirm with SET. The minutes flash on the display.
Select the desired minute using the function buttons +/-
and confirm with SET.
• Alarm
is shown in the display, "on" or "off" flashes
at the same time. To set, proceed as for Alarm
blood pressure monitor switches itself off automatically.
• Now select the desired user memory , ,
pressing the memory button M.
• If you do not select a user memory, the measurement
is stored in the most recently used user memory.
• To switch off, press the START/STOP button
forget to turn off the device, it will switch itself off auto-
matically after approx. 3 minutes.
7. Usage
General rules when measuring blood pressure yourself
• In order to generate as informative a profile of the progres-
sion of your blood pressure as possible and ensure that the
measured values can be compared, you should measure
your blood pressure regularly and always at the same times
of day. It is recommended that you measure your blood
pressure twice a day: once in the morning after getting up
and once in the evening.
• You should always carry out the measurement when you are
sufficiently physically rested. You should therefore avoid tak-
ing measurements during stressful periods.
All manuals and user guides at all-guides.com
. The
or
. If you
• Do not take a measurement within 30 minutes of eating,
drinking, smoking or exercising.
• Before the initial blood pressure measurement, make sure
always to rest for 5 minutes.
• Furthermore, if you want to take several measurements in
succession, make sure always to wait for at least 1 minute
between the individual measurements.
• Repeat the measurement if you are unsure of the measured
value.
Attaching the cuff
by
• Fundamentally, blood pressure can be measured on both
arms. Certain deviations between the measured blood pres-
sure on the right arm and left arm are due to physiological
causes and completely normal. You should always perform
the measurement on the arm with the highest blood pressure
values. Before starting self-measurement, consult your doc-
tor in this regard. From this point on, always take measure-
ments on the same arm.
• The device may only be operated with one of the following
cuffs. This should be selected in accordance with your upper
arm circumference. The fit should be checked before meas-
urement using the index mark described below.
Ref. no.
Designation
163.912*
Standard cuff
* Included in standard delivery
25
Arm circumference
22 – 36 cm
Publicité
