THOMSON Geni Mix Pro Manuel D'utilisation page 30

• Get the machine plugged, turn on the swit-
ch at the back of the machine, the machine
beeps once but no display.
STOP/ CANCEL
• Press this button, and all the back lights
turn on and comes to standby mode, you
can select the desired functions.
START/ PAUSE
• After selected the desired setting or pro-
gram, press this button to start working im-
mediately.
• Press this button during working process,
the machine pause working and standby,
LCD shows
open the lid, take away the jar, etc. But it
must be fixed well again before re-starting).
Press it again and it starts again.
• The machine will turn off automatically in
10min without operation under PAUSE sta-
tus.
• It is also a knob for setting timer, speed,
temperature, heat power, with increasing
when turn the knob clockwise, and de-
creasing when turn the knob anti-clockwise,
or choosing among the 15 auto programs.
TIMER
• The LCD screen shows
it means hour: minute: second.
• Press timer button and the minute signal
on LCD flicker; Turn the knob to adjust the
minutes. Press it again, the second signal
on LCD flicker, turn the knob to adjust the
seconds. Press it again, the hour signal on
LCD flicker, The max timer combination is
Max 00:59:59 by manual setting. The timer
limit of each program please refer to chapter
«MENU» below.
• Press the timer during working process, the
machine starts to count down directly.
(The consumer can
,