THOMSON Geni Mix Pro Manuel D'utilisation page 32

• For Using: Press MEM and select the desired
MEM function, and press START to start wor-
king as recorded.
• During working of MEM program, the machine
will stop for 10 seconds and keep beeping to
remind if it needs PAUSE and add ingredients. If
no operation during these 10 seconds, the ma-
chine goes to next step according to the setting.
• During working of MEM program, the user
can adjust any of the setting freely, but it will not
revise the recording.
• Press STOP/CANCEL during recording, the
machine will stop recording and abandon the
records.
• If the MEM program has no record, to work
with such MEM, the screen will show «NULL»
• Please do not use MEM setting for over 3h.
PULSE
• Press and hold this button at standby mode,
the machine starts working at maximum speed,
release and it stop immediately
• When the temperature in the jar is over 60°C,
PULSE cannot be used, and the screen will
show E11.
• There is a speed transfer on the structure, so
it's normal to hear little noise before the motor
start working at the first pulse.
• Maximum operation time for Pulse is 3 min
and then rest for 10 minutes
MENU
• This button is to choose among the below 15
auto programs
• Press this button in standby mode, the SMOO-
THIE signal on LCD starts flicker, turn the knob
to choose the desired program.
• For the program SOUPE, VELOUTE, VA-
PEUR, SAUCE, MIJOTE 1, MIJOTE 2, RE-
CHAUFFE, BOUILLIR, RIZ, PORRIDGE, after
completed, it will show «End». If no operation
after 10 minutes, it will turn to WARM automati-
cally stop after 1 hour.
• Some default setting of the program is adjus-
table, and it shows the real data on the screen;
some of them are blocked and it shows «--» on
the screen, as following form