Publicité
CS-7310P
Setting the Saw Chain
• For setting saw chain, round file
(7/32 in. diameter) and flat file are
used.
• Push file as shown.
• To keep correct position and
correct angle, use a file holder.
• Hold the file at a 10° angle from
level.
• Place the depth gauge tool firmly
on guide bar so that depth gauge
protrudes. Then file top of depth
gauge with the flat file until flat
with top of the depth gauge tool.
• Be sure 1/5th, or 20% of the file
diameter remains above cutter
edge.
X7503341100
© 02/24 ECHO Incorporated
MAINTENANCE
Depth Gauge Tool
1/5
25°
Keep this angle
10°
53
Publicité
