Publicité
OPERATION
After choke control knob is pulled and then knob is
returned to original position, throttle remains slightly open
(fast idle latch condition).
The chain will attempt to move when engine is started with
fast idle throttle latch engaged.
Do not start engine before chain brake is locked.
7.
Securely hold the chainsaw and
pull starter handle until first
starting sound.
8.
Push choke control knob (C) all
the way in (open
position).
9.
Pull starter handle to start the
engine.
Note: Do not pull starter rope
out to the maximum
possible position.
Note: Do not allow recoil handle
to snap back against the
casing.
Note: If engine does not start after 5 pulls, repeat instructions.
After starting the engine, immediately squeeze and then
release throttle trigger to release fast idle throttle latch,
otherwise severe brake damage can occur.
Never use fast idle throttle latch for cutting.
Use the fast idle throttle latch only in starting.
Note: Do not increase engine speed while chain brake is locked.
Severe brake damage will result.
32
choke
CS-7310P
X7503341100
© 02/24 ECHO Incorporated
C
Publicité
