Spectrophotometry
Spectrophotometer CCD 2
Ref : 701 606
If the pace of the raw spectrum emitted is different from these two screenshots, then you
may need to replace of your light sources.
Contact our After-Sales Service by mail (sav@jeulin.fr) by sending your screenshot and
the indicated integration time with activated automatic adjustment.
1.2 Device
1.1.1 Measurement Range
The device spectral range extends from 380 to 860 nm.
The absorption range extends from 0 from 2.5.
The integration time range extends from 0.1 ms to 5 s.
The device measures absorption (without unit) or transmittance (in %).
1.1.2 Vessel Carrier
The vessel carrier is designed to accommodate:
Note : Be careful to push the vessel until hearing the « click ».
1.1.3 Calibration / Changing the Bulb
You may not, under any circumstances, replace the bulb.
For any replacement, contact our After-Sales Service.
1.1.4 Cleaning the Device
You may clean the device using a soft cloth. Do not put any product on the device.
2
The software of the Spectrophotometer CCD2 allows to easily and quickly consummate
experimental acquisitions.
ENGLISH
-
Spectrophotometry vessels: 10 x 10 mm
-
Test tubes up to 12 mm
-
Slides or discs colored filters
Software
16