Publicité
4.4 DHF clock
Caution: when installing the clock, the master clock Sigma or the transmitter must be set to
INIT mode.
DHF clocks are self-setting clocks.
On the initial powering up, the clock displays INIT for 5 seconds then 00:00.
The synchronisation search is limited to 4 hours. Beyond, the clock stops searching
and displays only 2 fixed dots. A press on one of the keys will restart the
synchronisation search for 4 hours.
It memorises the address of the transmitter and switches to normal mode
automatically when time is received.
V - CONFIGURATION MENU
This mode enables you to select the different modes : 12 /24 hr, Eco, language selection,
type of display, summer-winter time zone and time difference. With the different languages,
there are no less than 4 million display possibilities offered by your calendar clock. We only
give the simple functions below, but by combining them, you can find them all.
To programme your clock, select the display option below then go to the paragraph
"Advanced Functions" page 35.
Standard display on your clock.
Hour
Day of the week
Date
Time display in 12 hr AM/PM mode.
Go into the configuration menu, point "2" (page 35).
Changing the language.
Go to the configuration menu, point "4" (page 35).
All manuals and user guides at all-guides.com
Alternating display in 2 languages.
Go into the configuration menu point "4" (page 35).
Display of the central line : To access these
functions, go into the configuration menu, point "5"
(page 36).
33
Publicité
