Publicité
USER'S MANUAL. TV EXPLORER HD +
When selecting the COMMANDS option in the Spectrum Analyser mode
[13] in the screen will appear a dynamic execution line in order to use with the
positioner commands: DRIVE EAST / WEST. This allows to carry out a fine adjustment
in steps or in seconds to aim the antenna through the rotary selector
Press the DiSEqC key
execution mode and to locate the mark cursor on the frequency or channel.
5.27
SATCR function
By means of function SATCR it is possible to control the devices of a TV
installation satellite that are compatible with the SatCR
Router), which allows to concentrate manifold down frequencies (slots) by an only cable.
By this way each user using a slot can tune and decode any signal present in the
satellite.
In order to select the SATRC function, press the DiSEqC key
panel, and using the rotary selector
are the configuration options that users can modify: slot selection, number of slots,
device address, Frequency sep, pilot signal activation, and finally the frequencies
corresponding to each slot.
10
SatCR is a trademark of STMicroelectronics.
12/2011
Figure 75.- DiSEqC commands: DRIVE
[21] on frontal panel in order to quit the commands
[1] activate the SATRC option. In the display
[1].
10
technology (Satellite Channel
[21] from frontal
Page 99
Publicité
