Publicité
USER'S MANUAL. TV EXPLORER HD +
VBER
LBER
In order to change the measurement highlighted, press the
monitor will appear cyclically all the measures available for the signal on tune.
5.14.1 Analogue TV: Measuring the Video Carrier Level
In the measurement mode of analogue signals, the TV EXPLORER
can work as an analogue indicator of level representing the signal present in the input.
In order to change the measurement mode press
screen like the following one:
Figure 23.- Analogue signal level measurement in terrestrial band.
Turn the rotary selector
[12] key to select the type of measurement to highlight on the monitor.
The available types of measurements are:
LEVEL:
C/N:
V/A:
12/2011
(Only for DVB-S) The BER measurement (Bit error rate) for the
digital signal after error correction (BER after Viterbi).
(Only for DVB-S2) The BER measurement (Bit error rate) for the
digital signal after error correction (BER after LDPC).
[1] to change the tuning channel/frequency. Press the
Level indication on the upper part of the screen (analogue
bar).
Carrier/Noise ratio measurement.
Video/Audio ratio measurement.
[12] key. On the
HD
+, monitor
[12] key, it will appear a
Page 49
Publicité
