Publicité
USER'S MANUAL. TV EXPLORER HD +
Simultaneously the instrument emits by means of the loudspeaker an acoustic
tone, which varies according to the level of received signal.
Press the
[24] key to switch between tuning by frequency or by channel.
Turn the rotary selector
To modify the SPAN use the cursor arrow left or right
To move the Gain vertical axis press the cursor arrow up or down
Hold the up arrow
per division.
Hold the down arrow
per division.
5.26
DiSEqC Command Generator
9
DiSEqC
('Digital Satellite Equipment Control') is a communication protocol
between the satellite receiver and the accessories of the installation (switches, LNBs,
etc.) proposed by Eutelsat, with the aim to standardize the diversity of switching
protocols (13 - 18 V, 22 kHz) and to satisfy the demands of the digital TV installations.
9 DiSEqC
TM
is a trademark of EUTELSAT.
12/2011
Figure 73.- Utility for antenna alignment.
[1] to change frequency or channel.
[6] for half a second to change the vertical axis to 10 dB
[6] for half a second to change the vertical axis to 5 dB
[6].
[6].
Page 97
Publicité
