To delete one or more of the captured images, press
DELETE PRINT SCREEN. You will see a list of captured screens files. To delete a file,
place on it and press the rotary selector
option and press the rotary selector
NOTE:
You cannot use this function in the case of OSD messages.
5.21 VIEWPRINT SCREEN Function
With this function the user can see the screen that has been captured by using the
PRINT SCREEN function (previous section).
To access this function, press
there is a list of files names of the captured screens and videos. You can move along
this list of the screen captures files by turning the rotary knob and see the image
thumbnail. To zoom in, press the rotary knob
to get back to the list of files.
5.22 USB On-the-Go Function
The TV EXPLORER
communication protocol called USB On-The-Go (OTG abbreviated). This type of
communication allows the equipment to work in two different ways depending on the
element connected to the USB port: as a server (host) or as a device (slave). In general,
the TV EXPLORER
slave when connecting to a computer. This function converts the PC into a much more
versatile instrument.
5.22.1
Connection of TV EXPLORER
(slave)
This option allows you to copy a certain file from the TV EXPLORER
USB flash drive or vice versa. To access these options, you should previously connect a
USB memory device (flash drive, portable hard drive, etc ...) to the mini USB female port
of the instrument. To do this use the CC-045 cable (Mini USB male - female USB)
supplied with the equipment. When the connection is working, it appears an USB icon on
the measurement screen (see picture) and the USB option becomes available on the
Utilities menu.
Page 86
HD +
has a female mini USB port that uses a specific
HD +
works as a host when connecting a USB flash drive and as a
USER'S MANUAL. TV EXPLORER HD +
[1]. To delete all stored files place on ALL
[1].
[22] and select VIEWPRINT SCREEN. Then
[1]. Press again the rotary knob
HD +
(host) to a USB flash drive
[22] and select
[1]
HD +
to the
12/2011