Publicité
USER'S MANUAL. TV EXPLORER HD +
If the AUTO ID function is launched in the spectrum analyser mode, the name of
the network will appear temporarily on screen (it also appears in the measurement
display). In case of working in the satellite band the orbital position appears as well.
While performing automatic identification may be the equipment keeps detecting
the NETWORK ID for a long time. During this process, the CANCEL button switches to
SKIP, which allows bypassing the NETWORK ID without losing the other parameters of
the autodetection.
Whenever the process detects new parameters for a channel or frequency will
create a new channel plan containing the detected information.
NOTE:
The
icon in the upper corner of a digital measurement screen states
that the signal level is higher than the minimum threshold (see the
PREFERENCES menu) but demodulator cannot lock it maybe due to some
wrong configuration parameter.
In such case, the user must press AUTO ID
NOTE:
In the case that is desired to explore or identify DVB-C signals will be
necessary to select previously a DVB-C standard as digital signal identifier
by means of
5.9
Channel plans
The signal automatic identification process as much as the exploration of the
frequency spectrum could yield the generation of new customised channel plans relative
to the usual work locations of the meter equipment.
In this way the characterisation of the band will be faster and easier when causing
that the equipment only analyses a shorter set of channels.
Whenever a new process of exploration is activated, the TV EXPLORER
analyses all the present channels in the active channel plan, which acts as pattern
channel plan specified by means of the option CHANNEL SET from configuration
measurement menu: CONFIGURATION
12/2011
[22] PREFERENCES menu.
[17].
[25] key.
Page 33
HD +
Publicité
