Publicité
Before first use
Setting up the appliance
1) Push the suction pipe
until it audibly clicks into place (see Fig . 1) .
Fig. 1
2) Push the suction pipe
until it audibly clicks into place (see Fig . 2) .
s
Fig. 2
3) Push the battery
2
audibly clicks into place (see Fig . 3) .
Fig. 3
■
8
│
GB │ IE
onto the appliance
f
into the floor brush
f
into the appliance until it
Mounting the wall bracket
and accessories holder
DANGER!
►
Ensure that there are no power cables or
other conduits or pipes in the wall at the
location where you intend to bore the holes
for the wall bracket and accessories holder
/
. Drilling into a current-carrying elec-
i
u
tric cable can be potentially fatal!
1) Remove the wall bracket
sories holder
. Insert the barrel plug
u
the mains adapter
as shown in the illustration below . Secure
i
the barrel plug
q
Fig. 4
2) Find a suitable mounting location for the wall
bracket and accessories holder
–
The wall bracket and accessories holder
must be mounted with sufficient
i/u
distance to the floor to ensure easy inser-
tion and removal of the appliance from
the wall bracket
–
A mains socket must be accessible for the
mains adapter
3) Use the accessories holder
four drill holes on the wall (see Fig . 5) .
Fig. 5
from the acces-
i
q
into the wall bracket
0
by turning it (see Fig . 4) .
:
i/u
.
i
.
0
to mark the
u
of
Publicité
