Trebs 99242 Mode D'emploi page 29

NOTICE
If the plug does not fit fully into the outlet, reverse the plug to reduce the risk of electric shock.
If it still does not fit, contact a qualified electrician. Do not modify the plug in any way.
Maximum rating of 350 watts is based on the jar attachment that draws the greatest power. Other recommended
attachments may draw significantly less power.
This appliance comes with a thermal non resettable fuse feature to prevent damage to the motor in the case of extreme
overload. Should the unit shut off unexpectedly, unplug it and let it cool for at least 15 minutes before continuing (see
"Operating and Safety Tips,").
2. Unpacking Instructions
1. Place the gift box containing appliance on a flat, sturdy surface before unpacking.
2. Remove instruction booklet and other printed materials from top of packaging material. Next remove top pulp tray.
3. Carefully lift blender base from box and set aside.
4. Remove blender jar, chopping cup and travel cups and set aside.
5. Before using for the first time: Wash all parts according to the Cleaning and Maintenance section of this booklet to
remove any dust or residue.
6. To assemble the blender, follow the Assembly instructions of this instruction booklet. Replace all packaging materials
in the box and save the box for repackaging.
3. Assembly
After washing all parts, please see below for assembly. Place base on flat surface and plug in.
Blender Jar operation
1. With the base unit on the tabletop and unit plugged in, place the blender jar assembled with the blade assembly onto
the base and secure into place.
2. Note: Blade assemblies are interchangeable based on recipes and desired end results.
3. Add food ingredients. Replace the cover. You may add more ingredients by lifting the measured pour lid and dropping
ingredients through the fill area. Replace the pour lid after adding ingredients.
Do no put hands into jar with blender in running mode.
4. Note: To remove blender jar cover, lift edge of cover upward. Do not use measured pour lid to remove cover.
5. For continuous blending, choose the desired speed (1or2).
6. To pause the blending process, rotate the speed button (P).
7. The Pulse function can be used to break apart larger pieces of food. The Pulse function is also effective for starting the
blending process when you do not want continuous power or processing items that do not require an extended
amount of blending.
8. When you have finished blending, rotate the speed button to 0 modes. Then remove the blender jar from the base.
Pour out ingredients. NEVER TOUCH THE BLADE ITSELF. Unplug the unit.
PLEASE NOTE: It is possible to crush ice cubes. However you should add a small amount of water to prevent damage to the
29