Publicité
Driving in pedestrian areas
As mentioned previously, when using the scooter in pedestrian areas, always lower your maximum speed to
that of the pedestrians around you. Remember the stopping distance of your scooter and always leave enough
space to stop safely to avoid collisions with pedestrians or other objects.
CARE AND MAINTENANCE
General cleaning
The shrouds and seat of the scooter should be cleaned with a damp cloth and a mild detergent. Do not use
abrasive cleaners or solvents, as this will damage the plastic components. Do not spray water (from a hose or
high-pressure cleaner) onto the scooter, as this could damage the electronics.
Routine maintenance
We recommend that you have your scooter serviced at least once a year by an authorised dealer. Please check
the following:
Check the product
Check freewheel operation
Checking your scooter's speed
Scooter cleanliness
Check the condition of the battery
Check the condition of the tyre cable sheaths
Check that the seat is in the correct position for
use
Check the brakes
Check the condition of the tyres
TROUBLESHOOTING
Your scooter is equipped with the latest electronic controls programmed to protect the electrical system against
abnormal overloads.
Fuses
There are two fuses on the battery cables to protect against possible overloading of the wiring.
Checklist
If your scooter does not work, please check the following:
- The unit is switched on.
- All connectors and connections are secure.
- The battery charge level indicates that the battery is fully charged.
- The freewheel device is in the driving position.
- The circuit breaker has not tripped if fitted.
If the freewheel device has been used with the scooter switched on, the scooter will not operate until the key
switch has been turned off and on again.
If a fault occurs, the fault will be identified by a sequence of beeps which relate to the fault in the table below.
Version Février 2024
Anytime Weekly
X
X
X
X
X
Monthly
X
X
X
Page 26 sur 43
Publicité
