Publicité
All manuals and user guides at all-guides.com
Menu 09 PELLET CORRECT - (Correction of appliance combustion).
Radiocontrol Display
PELLET CORRECT
ACCESS KEY
PELLET CORRCT
Menu 10 SETTINGS TECHNIC -(Reserved to TECHNICIANS).
Radiocontrol Display
TECHNICAL SETTINGS
ACCESS KEY
This section is reserved to the TECHNICIANS and permits to effect working regulations on the
Cleaning to be carried out by the User
For thew correct working of the appliance, it is necessary to carry out some short maintenance
operations, these operations should be effected always with switched off appliance and in cold
conditions
Every DAY
Fume duct cleaning.
To be effected with appliance
switched off and in strictly cold
conditions.
Take the lever placed into the
lower compartment inside the
front door; insert the lever in the
central visible pin ( see the
picture); act by pulling down and
releasing 4 / 5 times (see picture).
In this way you clean the fume
ducts.
Burner basket cleaning. Take out the burner basket, remove the residual dregs, re-place the
basket taking care to verify the perfect join in its housing.
Ashtray cleaning Open the lower door, take out the ashtray cover (to release the cover, turn
the two lateral hooks), take the ashtray and empty it carefully, paying attention to possible hot
combustion residuals, place the ashtray in its housing and closed the cover of the ashtray.
DO NOT empty the ashes in inflammable containers, remember that into the ashes could be
some embers, even after several hours from the extinction.
Combustion modification
Insert access key to accede to the combustion modification
Correction of the load of fuel
Menu reserved to TECHNICIANS
Insert access code
appliance.
68/116
IT IT IT IT- - - - GB
GB- - - - FR
FR mod. 698 TPC– 698 TP-SAC
GB
GB
FR
FR
Description
Description
Example
33
-02
Example
Publicité
