All manuals and user guides at all-guides.com
Fuel
The flue to be utilized is
•
It is not allowed to use solid fuels as straw, mais, hazelnut, pinecone or others, different
•
from the ones indicated in this handbook. We recommend to ask to Your Dealer always
for certified pellet (as per above table).
INFORMATION ABOUT PELLETS
Pellets are realized with wood rejections that come from sawmills or from planing shops
•
and with wood fragment of forest industry. This raw material is shattered, dried up,
crushed, without any bound material till up to become the pellet fuel.
PELLETS PRESERVATION
Pellet has to be kept in a dry and clean rooms.
•
Starting
The appliance should set at work only after having completed the following operations:
•
complete assembling, connection to exhaust fumes duct and to the heating plant. A new
stove needs to complete the drying process of the paint. During the first heatings you can
notice the following situations:
- During the first ignitions the appliance may exhale bad smell. We suggest a good
aeration of the room till bad smells have been eliminated.
- The complete drying process will be obtained after some heating operations.
WOOD PELLET LOADING
Be careful during wood pellet loading operation ! The pellet bag should not touch the
•
warm stove.
The load of pellet is done from the top, after having removed the cover. During stove
•
functioning, it is advisable to employ the specific glove, because the stove surface could
reach high temperature. Check always the level of fuel in the container and check-it
often, to avoid the light off of the stove. The cover of the container must be always
closed, except during pellet loading. Pellet container capacity : information on Technical
details part.
Be careful that no external corps, such as pieces of bag, wood pieces or other parts, that
•
can obstruct the screw feeder and damage it, enter into the pellet tank.
:
GOOD QUALITY WOOD PELLETS'
Calorific power
kWh/kg
Density
kg/m
Water contents
Ash percentage
Diameter
mm
Lenght
mm
Contents
IT IT IT IT- - - - GB
GB- - - - FR
FR mod. 698 TPC– 698 TP-SAC
GB
GB
FR
FR
5,0
3
650
%
Max 8% of weight
%
Max 1% of weight
6
20 ÷ 30
%
100% untreated wood
55/116