Publicité
All manuals and user guides at all-guides.com
During the working phase the appliance controls constantly the
temperature of the room and of the boiler. If during the working phase
at the selected power (i.e. pow.4) one of the two temperatures is
reached, the appliance reduce automatically the power and the display
signals "WORK MODULAT.
INDICATIONS ON DISPLAY
Display
NO SIGNAL
START
LOAD
PELLET
FLAME
LIGHT
WORK
WORK
MODULAT
Function in Stand-
COOLONG
WAITING
STAND-BY
SANI
WORK
CLEANING
BASKET
CLEANING
FINAL
SMOKE
MODULAT
ALARM
ACTIVATD
Appliance phase
The radiocontrol
do not receive a
signal from
appliance
Lighting element
heating
Initial fuel load
Fuel lighting
Working at power
Working at
reduced power
By
OFF waiting for
re-ignition
Production of
warm sanitary
water
(only model
698TPC)
Automatic
cleaning cycle of
burner basket
Extinction
High fume
temperature
Appliance in
Alarm, start of
extinction cycle
IT IT IT IT- - - - GB
GB- - - - FR
FR mod. 698 TPC– 698 TP-SAC
GB
GB
FR
FR
Place the radiocontrol in the same room as the
appliance and eliminate every hindrance in radio signal
( the aerial is placed in the back right part of the
appliance )
Lighting phase started, heating of the lighting element
Fuel started to convoy to the burner basket
The appliance has noticed the presence of fire in the
basket, stabilization phase starting.
The appliance has terminated the lighting phase and is
now ready to work at the selected power.
Boiler or room temperature has reach the selected
values.
Room or boiler temperatures have exceeded the
selected ones. Appliance works in stand-by waiting for
diminution of temperatures.
A selected temperature has been exceeded, appliance
first reduce the power and then switches off
Sanitary warm water has been requested, appliance
commute to max. power to reach the selected temp.
Appliance carries out an automatic procedure to
eliminate part of residuals remained into the burner
basket
Appliance started the extinction phase and proceed
with the disposal of the fuel still into the basket.
Appliance noticed a too high fume temperature, the
power is at the moment reduced.
Appliance noticed an anomaly, extinction cycle starts
and the display signals the type of problem.
60/116
Explanations
Publicité
