Publicité
{
4. Remove trim ring from outer
6. Rotate and reassemble outer door
window assembly
and trim ring
Using a Phillips screwdriver, remove the 6 screws from the
..
y
7
er
7
a
outer window retainer and rotate the outer window assembly
Align the notches on the outer door assembly with the tabs on
clockwise until the square notches line up with the 4 tabs
the trim ring and lower into place as shown in figure A.
on the trim ring indicated with arrows in the figure A above.
Rotate the outer door assembly counterclockwise to lock tabs
Then lift the outer window retainer up and off the trim ring
into place (figure B). Using a Phillips screwdriver, secure with
and set aside (B).
6 screws removed earlier.
rc
IMPORTANT:
Do not overtighten.
5.
Reverse outer window/handle
Rotate
the outer window
17
Publicité
