Publicité
All manuals and user guides at all-guides.com
EN
If a press connection has not been completely pressed – in
the event of a power cut, for example – it must be pressed
again. The Geberit pressing jaw and the pressing collar
must not be removed or rotated during the process.
Corrective pressing is performed in the same way as a
normal pressing operation. Depending on the state of the
preliminary pressing, there may be considerable idle stroke
before the pressing tool engages during corrective pressing.
Maintenance
Maintenance regulations for Geberit pressing collars
For safety reasons, it is absolutely essential to observe the
following maintenance intervals and perform the maintenance work
described. The same also applies to the mandatory maintenance
regulations for the pressing tools. The Geberit Mapress pressing
collars are marked with a service sticker which indicates the date of
the next mandatory maintenance to be carried out by an authorised
repair shop. Pressing collars that are not maintained, or are not
professionally maintained, can cause accidents and injuries. The
pressing collar must always be taken for maintenance together with
the pressing tool in its transport case.
36
4885212939-1 © 01-2020
968.751.00.0(00)
Publicité
