Publicité
Replacing the Blade Set
To remove the blade set
Fig. 18a shows the high performance
blade set.
1. Stop the motor, remove the battery
pack and grass bag from the mower.
2. Turn the mower on its side.
3. Insert a metal rod (stabilizer 1)
Ø5/16" (8 mm) or less in the
stabilizer hole to prevent the blade
set from rotating when loosening the
shaft bolt.
4. Use the 9/16" (14 mm)
wrench to turn the shaft bolt
COUNTERCLOCKWISE to loosen and
remove the shaft bolt (Fig. 18a).
NOTICE:
If the shaft bolt rotates with the
motor shaft when loosening the shaft bolt,
place another metal rod with diameter less than 1/4 in (6.35 mm) into the hole in the
fan to act as stabilizer 2.
5. Remove the conical spring washer, the plain washer, and the blade set (Fig. 18b).
6. Leave the fan on the motor shaft.
To replace the blade set
Fig. 18c shows the high-lift bagging blade set (not included).
NOTICE
: To re-install or replace the blade set, be sure to replace the parts in the exact
order in which they were removed.
42
56-VOLT LITHIUM-ION CORDLESS 22" LAWN MOWER — LM2230SP/LM2230SP-FC
18a
Stabilizer 2
18b
Conical Spring Washer (convex
surface facing downwards)
High Performance
Blade Set
Stabilizer 1
Plain Washer
Shaft Bolt
Publicité
