Publicité
CUTTING-HEIGHT ADJUSTMENT
(Fig. 10)
WARNING:
from the deck when adjusting the cutting
height.
The mower can be set to 8 cutting heights
between 1 inch (25 mm) and
4 inches (105 mm). A marking indicates
the selected cutting height.
Choose the proper cutting height according to the type and condition of the grass to be
cut.
1. Switch off the mower and wait for the cutting blade to come to a complete stop.
2 Remove the battery pack.
3. Pull the cutting height adjustment knob out of the detent and set it to the desired
position.
NOTE:
To avoid overloading the motor, avoid setting the cutting height too low in tall
grass. If the motor speed begins to slow, raise the cutting height.
30
56-VOLT LITHIUM-ION CORDLESS 22" LAWN MOWER — LM2230SP/LM2230SP-FC
Keep your feet away
10
Cutting-height Adjustment Knob
a
Cutting-height
Indication Plate
b
Publicité
