Vasco DX4 Manuel D'installation Et D'utilisation page 99

MOUNTING
VENTILATION
UNIT
1
A
B
C
Minimum 1cm
Minimum 1cm
D
ISO
MOUNTING VENTILATION UNIT INSTALLATION CONDITIONS / VERTICAL WALL MOUNTING 13
INSTALLATION CONDITIONS
In order to determine whether the installation of the ventilation unit is
possible in a specific room, account must be taken of the following aspects:
• the room must be frost-free
• the installation must be done in accordance with the general and locally
applicable safety and installation instructions for (amongst other things)
ventilation, electricity and sewer systems as well as in accordance with
the rules outlined in this manual
• the following facilities must be present in the room:
• air duct connections
• 230V±10%, single-phase, 50Hz socket
• provision for condensation drain
- no construction dust is allowed in the ventilation unit or air duct system
2
VERTICAL WALL MOUNTING
Mount the ventilation unit on a wall of sufficient rigidity and provide sufficient
space under the unit for condensation drainage. Also ensure sufficient
distance in front of the device to carry out necessary maintenance work.
PROJECT
209 DX
Step 1:
BENAMING
Ventilation Unit DX4
Attach the wall bracket level to a wall of sufficient strength.
Tel. +32 (089) 79.04.11
B 3650 DILSEN
Fax. +32 (089) 79.05.00
Dowels and screws are not included. Use suitable fastening materials here
according to the wall construction.
3 4
Minimum 1cm
Minimum 1cm
MACHINE NR.
DATUM
GET.
26/04/2018 SHO
TEKENING NR.
209.00.00.00
SCHAAL
A4
(1:2)
59cm
49cm