Scheppach PM1200 Traduction Des Instructions D'origine page 21

14. Troubleshooting
Problem Possible causes
Engine does not Engine, cable or connector defective,
run. fuses burnt.
Engine does not Circuits in the network are overloaded
reach full power. (lamps, other engines, etc.)
Motor overheats Overloading of the engine, insufficient
easily. cooling of the engine.
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
All manuals and user guides at all-guides.com
Remedies
Have the machine checked by a specialist. Never repair
the engine yourself. Attention! Check the fuses and
replace them if necessary.
Do not use any other devices or engines on the same
circuit.
Avoid overloading the engine during mixing and remove
dirt from the engine to ensure optimum engine cooling.
GB | 21