Publicité
◾
Do not open or mutilate the battery. Released
electrolyte is corrosive and may cause damage to the
eyes or skin. It may be toxic if swallowed.
CAUTION!
The electrolyte is a dilute sulfuric acid that
is harmful to the skin and eyes. It is electrically conductive
and corrosive.
◾
Exercise care in handling batteries in order not
to short the battery with conducting materials
such as rings, bracelets, and keys. The battery or
conductor may overheat and cause burns.
◾
Battery tools do not have to be plugged into an
electrical outlet; therefore, they are always in
operating condition. Be aware of possible hazards
even when the tool is not operating. Take care when
performing maintenance or service.
◾
Remove the battery pack before servicing, cleaning
or removing material from the tool.
◾
Replacement Parts - When servicing, use only
identical EGO replacement parts. Use of any other
accessory or attachment may increase the risk of
injury.
◾
Do not wash with a hose; avoid getting water in
motor and electrical connections.
◾
If situations occur that are not covered in this
manual, use care and good judgment. Contact the
EGO Service Center for assistance.
◾
Save these instructions. Refer to them frequently
and use them to instruct others who may use this tool.
If you lend this tool to someone else, also lend these
instructions to them to prevent misuse of the product
and possible injury.
SAVE THESE INSTRUCTIONS
NOTE: SEE YOUR POWER HEAD OPERATOR'S
MANUAL FOR ADDITIONAL SPECIFIC SAFETY RULES.
SPECIFICATIONS
Guide Bar Length
Chain Pitch
Chain Gauge
Saw Chain Type
Guide Bar Type
Chain Oil Tank Capacity
Recommended Operating
Temperature
Recommended Storage Temperature -20°C-70°C
Weight (with chain sheath)
Measured sound power level L
Sound pressure level at operator's
ear L
PA
Guaranteed sound power level L
(measured according to 2000/14/EC)
Valuation of
vibration a
250 mm
9.5 mm
1.1 mm
AC1000/AC1001
AG1000/AG1001
◾
The above parameters are tested and measured
equipped with power head PH1400E/PH1420E/
220 ml
PHX1600.
◾
The declared vibration total value has been measured
-15°C-40°C
in accordance with a standard test method and may be
used for comparing one tool with another;
POLE SAW ATTACHMENT — PSA1000
1.89 kg
101.4 dB(A)
K=2.36 dB(A)
(PH1400E)
103.6 dB(A)
K=0.67 dB(A)
WA
(PH1420E)
101 dB(A)
K=2.3 dB(A)
(PHX1600)
87.0 dB(A)
K=3 dB(A)
(PH1400E)
89.7 dB(A)
K=3 dB(A)
(PH1420E)
93 dB(A)
K=3 dB(A)
(PHX1600)
104 dB(A)
WA
2.1 m/s2
K=1.5 m/s
(PH1400E)
3.54 m/s2
Front-assist handle
K=1.5 m/s
(PH1420E)
4.47 m/s
K=1.5 m/s
(PHX1600)
:
2.5 m/s
h
K=1.5 m/s
(PH1400E)
2.64 m/s2
Rear handle
K=1.5 m/s
(PH1420E)
1.93 m/s
K=1.5 m/s
(PHX1600)
EN
2
2
2
2
2
2
2
2
2
9
Publicité
