Publicité
Programming
Cycle progress
Type of washing and
temperature
1
90˚ 60˚
50˚
40˚
60˚
40˚
30˚
30˚
40˚
30˚
40˚
Start/Pause: press briefly
Cancel: long press
Delayed start setting
Programming a basic washing cycle:
• Depress the "On/Off" button
• Turn the selector
1
to select the programme and the washing temperature. The
machine proposes the recommended spin speed for the type of fabric selected.
• If the spin speed is acceptable and you do not wish to use any options or delayed
start, press "Start/Pause"
2
• At the end of the cycle, the 3 cycle progress lights remain lit. Release the "On/Off"
I /O
button and wait 1-2 minutes for the safety device to unlock the lid (2).
: to assist access to your washing , the drum opening automatically
positions itself at the top.
(1) - Before starting your machine, check that the power cable is plugged in and the water tap is open. Also ensure that the drum doors
and the lid are firmly closed.
(2) - As a safety measure, it is advisable to unplug the power cable and turn off the water tap.
Programming a full washing cycle:
• Depress the "On/Off" button
• Turn the selector
1
to select the programme and the washing temperature. The
machine proposes the recommended spin speed for the type of fabric selected.
• Use the setting button
5
to select:
- Either to alter the proposed spin speed
- Or drip dry. The cycle will finish with a gentle spin at 100 rpm
- Or stop with the drum full of water. Your machine stops with the drum full of water
before the final spin.
• Use button
4
to select the "Pre-wash", "Extra Rinse" or "Anti-creasing" options,
if required
• Select immediate start by pressing the "Start/Pause" button
• Or select a start delayed by 3, 6 or 9 hours using button
Adding or removing an item during the cycle
• Press the "Start/Pause" button
• Add or remove the items of laundry * .
• Press the "Start/Pause" button
(*) The lid may take 1-2 minutes to unlock.
If you have selected a "Delayed Start", you can instantaneously access the drum
at any time during the phase before the washing cycle starts, without having to
interrupt and restart the cycle.
Cancelling while programming, washing or during a pause:
• Depress the "Start/Pause" button
This can be done at any time during the cycle or during programming, or even
during a pause.
If you do this while the machine is in the waiting period for a delayed start, only
the delayed start is cancelled.
For more details on the various functions, please refer to "DETAILS OF THE FUNCTIONS".
Please note: if you have stopped your machine by pressing the "On/Off" button or if there has been a power failure, when power is restored to
your machine, the washing cycle will restart automatically at the point at when the cycle was interrupted.
A
1000 rpm
800
600
9h
400
6h
3h
2
3
4
5
Spin speed selection
"Anti-creasing", "Pre-wash" and "Extra rinse"
options
I / O
(1).
The washing cycle will now start.
I / O
.
2
3
.
(impossible during spin):
2
to interrupt the cycle.
2
to restart the cycle.
2
for at least 1 second.
On/Off
I / O
M A D E
I N
F R A N C E
(lights
.
"3h", "6h" or "9h" light flashes depending on the period selected
- 5 -
Apart from the "On/Off" button, all the
buttons are sensitive and therefore do not
remain depressed.
During programming, all the buttons except
for "Start/Pause" can be kept depressed
but, for more precise adjustment we
recommend that you operate them using a
series of brief presses.
You should operate the "Start/Pause" by
pressing it briefly except when cancelling
the programme* or re-initialising the cycle
counter*, in which case it should be kept
depressed.
(*) Details of the functions are provided in
the following pages.
If one of the cycle progress lights
when you switch on, cancel before you carry
out any other operation.
Warning: the "On/Off" button cannot cancel
a programme.
Lights
recommended spin speed light
recommended spin speed light + light
A
all light successively until the cycle is complete)
lights
permanently lit
Lights
recommended spin speed light
light "800" for example
or light
or light
lights for the options chosen
+ selected spin speed light
light
A
light
flashes
A
light
permanently lit
return to initial display
A
is lit
Publicité
