Publicité
4 Installation
General warnings
• Refer to the nearest Authorised Service
Agent for installation of the product.
Make sure that the electric and gas in-
stallations are in place before calling the
Authorised Service Agent to have the
product ready for operation. If not, call a
qualified electrician and fitter to have the
required arrangements made. The manu-
facturer shall not be held responsible for
damages arising from procedures carried
out by unauthorized persons which may
also void the warranty.
• It is customer's responsibility to prepare
the location the product shall be placed
on and also have power and/or gas utility
prepared.
• The rules specified in local standards
about electrical and/or gas installations
(legal rules on installation) shall be fol-
lowed during product installation./Para-
graph
• Check for any damage on the appliance
before the installation. Do not have it in-
stalled if the appliance is damaged. Dam-
aged products cause risks for your
safety.
4.1 Right place for installation
• The hob is designed for installation into
commercially available work tops. A
safety distance must be left between the
appliance and the kitchen walls and fur-
niture. See figure (values in mm).
• The worktop must be aligned and fixed
horizontally.
• Cut aperture for the hob in worktop as
per installation dimensions.
• This product is a class 3 device accord-
ing to EN 30-1-1standard.
• Allow a minimum distance of 750 mm
above the hob surface.
• If a cooker hood is to be installed above
the cooker, refer to cooker hood manu-
facturer instructions regarding installa-
tion height. If not defined any size in the
hood manual, this height should be at
least 650 mm.
• Any kitchen furniture next to the appli-
ance must be heat-resistant (100 °C
min.).
EN / 16
EN
PL
FR
Publicité
