Fujitsu SPARC Enterprise M4000 Guide D'installation page 70

L'exemple suivant illustre la sortie de la commande prtconf.
#
prtconf
System Configuration:
Memory size: 1024 Megabytes
System Peripherals (Software Nodes):
SUNW,Sun SPARC
. . .
B-16
Guide d'installation des serveurs SPARC Enterprise M4000/M5000 • Mars 2012
packages (driver not attached)
SUNW,builtin-drivers (driver not attached)
deblocker (driver not attached)
disk-label (driver not attached)
terminal-emulator (driver not attached)
dropins (driver not attached)
kbd-translator (driver not attached)
obp-tftp (driver not attached)
SUNW,i2c-ram-device (driver not attached)
SUNW,fru-device (driver not attached)
SUNW,asr (driver not attached)
ufs-file-system (driver not attached)
chosen (driver not attached)
openprom (driver not attached)
client-services (driver not attached)
options, instance #0
aliases (driver not attached)
xxxx