Publicité
ENGLISH
Warning! Avoid using the SteaMitt
shown in figure H.
Warning! Should a problem occur during use, use the quick
release tab (8) to quickly remove the SteaMitt
hand as shown in figure I.
After use (Fig. E)
•
Turn the SteaMitt
'OFF'. Turn the steam operation
TM
button (1) to off and then press the ON/OFF button (5).
•
Wait until the SteaMitt
TM
•
Unplug the SteaMitt
TM
•
Empty the water tank.
•
remove the cleaning pad (9) and wash it ready for next
use.
Protecting the environment
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your BLACK+DECKER
product needs replacement, or if it is of no further use to
you, do not dispose of it with other household waste. Make
this product available for separate collection.
•
BLACK+DECKER provides a facility for recycling
BLACK+DECKER products once they have reached the
end of their working life. This service is provided free of
charge. To take advantage of this service please return
your product to any authorised repair agent who will
collect them on our behalf.
•
You can check the location of your nearest authorised
repair agent by contacting your local BLACK+DECKER
office at the address indicated in this manual.
Alternatively, a list of authorized BLACK+DECKER
repair agents and full details of our after-sales service
and contact are available on the Internet at:
www.2helpU.com.
Technical data
FSH10SM FSH10SM1 FSH10SMP
Voltage
V
220-240
ac
Power
W
1000
Tank Capacity ml
Weight
kg
1.65
Troubleshooting
If your appliance seems not to operate properly, follow the
instructions below. If this does not solve the problem, please
contact your local BLACK+DECKER repair agent.
8
All manuals and user guides at all-guides.com
(Original instructions)
in tight corners as
TM
from your
TM
cools down.
from the electrical wall outlet.
220-240
220-240
1000
1000
100
100
100
1.65
1.65
Problem
Step
The SteaMitt
is
1.
TM
not turning on
2.
3.
The SteaMitt
is not
4.
TM
producing steam
5.
The SteaMitt
stops
TM
6.
producing steam
during use
The SteaMitt
is
7.
TM
producing too little
steam during use
Steam is escaping
8.
from unexpected
areas of the unit.
Where can I get
9.
further information /
accessories for my
steam mop
Warranty
BLACK+DECKER is confident of the quality of its products
and offers an outstanding warranty.
This warranty statement is in addition to and in no way
prejudices your statutory rights.
If a BLACK+DECKER product becomes defective due to
faulty materials, workmanship or lack of conformity, within 24
months from the date of purchase, BLACK+DECKER
warranty to replace defective parts, repair products subjected
to fair wear and tear or replace such products to ensure
minimum inconvenience to the customer unless:
The product has been used for trade, professional or hire
purposes;
The product has been subjected to misuse or neglect;
The product has sustained damage through foreign
objects, substances or accidents;
Repairs have been attempted by persons other than
authorised repair agents or BLACK+DECKER service
staff.
To claim on the warranty, you will need to submit proof of
purchase to the seller or an authorised repair agent. You can
check the location of your nearest authorised repair agent by
contacting your local BLACK+DECKER office at the address
indicated in this manual.
Alternatively, a list of authorised BLACK+DECKER repair
agents and full details of our after-sales service and contacts
are available on the Internet at: www.2helpU.com.
Possible solution
Check the unit is plugged
in at the wall socket.
Check the unit is
switched on using the
ON/OFF switch (5)
Check the fuse in the plug.
Turn on the steam switch
(1) After a few seconds
steam will be produced.
Check that the water
tank is full.
Check step 5, then 3.
Check step 5.
Refer to the assembly chapter
of the manual for correct fitting
instructions of all parts and
accessories. Check for any
signs of tears or rips in the
SteaMitt
or cleaning pads.
TM
If this continues, stop using
the unit.
www.blackanddecker.co.uk/
steammitt
Publicité
