Troubleshooting - SilverCrest SHBS 500 B1 Mode D'emploi

__GRA93480_B2.book Seite 54 Montag, 9. September 2013 10:28 22
6. Figures H+I: press the black fastening clips carefully away from the sides
of the board and remove the board from its fastening.
7. Figure J: release the connections between the battery and the board with a
pair of pliers/wire cutters. Remove the exposed battery. Take the battery and
the device separately to suitable disposal.
The lithium-ion battery used for this device may not be treated as
household waste. The battery must be disposed of properly. Con-
tact battery distributors or local waste disposal points for this.

9. Troubleshooting

If your device fails to function as required, please try this checklist first. Perhaps
there is only a minor problem, and you can solve it yourself.
DANGER! Risk of electric shock!
Do not attempt to repair the device yourself under any circumstances.
Fault
No function
The blades|2 of the
shaving head|9 are not
running smoothly
54 GB
Possible causes/Action
• Has the device been connected to the power sup-
ply?
• Is the battery empty?
• Has the shaving head been cleaned and the
blades oiled?
Li-ions