SOLIS 790 Mode D'emploi page 57

F Temperature control
Once you have connected the connection adapter of the power cord to the appli­
ance jack and the power plug to a suitable power outlet, a red or green light lights
up around the temperature control.
You can smoothly adjust the temperature with the temperature control. The bigger
the dots around the temperature control, the hotter the heating element gets.
Turn the temperature control to the right (clock wisely) to the desired position.
The light surrounding the temperature control glows red as long as the appliance
heats up.
Once the set temperature is reached, the light surrounding the temperature control
switches to green.
This will happen within the fi rst approx. 75% of the heating power range. Within
the remaining approx. 25% to the maximum heating power, the light surrounding
always lights up red.
Red light = Heating-up phase
Green light = Temperature has been reached
CAUTION: The power cord has to be removed from the appliance resp. the power
plug has to be pulled if you do not use the appliance. Only then, the appliance is
defi nitely switched off.
G Appliance jack for the connection adapter of the connection cord
You can connect up to two separate Solis 4 in 1 Table Grills to this 4 in 1 Table Grill.
Plug the adapter with the contact pins of the included connection cord into the
appliance jack below the temperature control. Plug the other end into the appliance
jack of the second 4 in 1 Table Grill.
Just like that, you have two Table Grills on your table, with only one power cord
(and requiring only one power socket), connected by a intermediate cable.
A third Solis 4 in 1 Table Grill can be connected in the same manner.
H Appliance jack for connection adapter of power cord
The connection adapter on the power cord has to be connected to this appliance
jack before the power cord is plugged into the power socket to connect the appli­
ance to the power grid.
57