Publicité
Starting the cooking programme
After selecting the program, press the button Start /Quick start, to start the
preset cooking programme.
End of the cooking programme
Once the end of the cooking time is reached, four signal tones will be emitted and END will
appear in the display.
11.13 "Microwave and Convection" mode
The device offers four pre-programmed settings, which facilitate combination cooking
using hot air (convection) and microwaves.
Setting the temperature
Select the temperature you require by pressing the Micro + Convection
button until you reach the level you require (see following table).
Setting the cooking time
Set the cooking time by turning the Time/Menu control dial.
Starting the cooking programme
After selecting the program, press the button Start /Quick start, to start the
preset cooking programme.
End of the cooking programme
Once the end of the cooking time is reached, four signal tones will be emitted and END will
appear in the display.
Please note
► You can check the hot air temperature during cooking by pressing the button Micro +
Convection.
Button presses
1
2
3
4
11.14 "Multi-stage Cooking" Mode
In this mode you can program up to up to three automatic cooking sequences. The
sequence and duration of defrosting, microwave cooking and grilling or hot air mode is
adjustable.
The example below describes the settings for a multi-stage cooking program in the
sequence:
Defrost
Caso MCG25Ceramic chef
Display
Temperature
110
140
170
200
110 °C
140 °C
170 °C
200 °C
63
Publicité
