9123837
SPECIFICATIONS
Load Capacity
Lift Range
Caster
Material
Finish
Dimensions (L x W x H)
INTRODUCTION
The service lift can raise a snowmobile high enough to access the lower chassis
for repairs and maintenance. A manual screw jack operates with a hand crank.
SAFETY
WARNING! Read and understand all instructions before using this tool.
The operator must follow basic precautions to reduce the risk of
personal injury and/or damage to the equipment.
HAZARD DEFINITIONS
Please familiarize yourself with the hazard notices found in this manual. A
notice is an alert that there is a possibility of property damage, injury or death
if certain instructions are not followed.
This notice indicates an immediate and specific hazard that will result in severe
DANGER!
personal injury or death if the proper precautions are not taken.
WARNING! This notice indicates a specific hazard or unsafe practice that could result in a
serious injury if the proper precautions are not taken.
CAUTION! This notice indicates a potentially hazardous situation that may result in minor
or moderate injury if proper practices are not taken.
This notice indicates that a specific hazard or unsafe practice will result in
NOTICE!
equipment or property damage, but not personal injury.
WORK AREA
1.
Operate in a safe work environment. Keep your work area clean, well-lit
and free of distractions. Place lights so you are not working in a shadow.
www.princessauto.com / 1-800-665-8685
SNOWMOBILE LIFT
800 lb (362 kg)
6-7/8 to 28 in.
2-1/2 in., rubber
Steel
Powder Coat
67-3/4 x 28-5/16 x 8 to 29-1/8 in.
V1.1
Page 2