Publicité
9123837
DISPOSAL
Recycle a tool damaged beyond repair at the appropriate facility.
Contact your local municipality for a list of disposal facilities or by-laws for
electronic devices, batteries, oil or other toxic liquids.
DO NOT pollute the environment by allowing uncontrolled discharge of
waste oil.
TROUBLESHOOTING
Visit a Princess Auto Ltd. location for a solution if the tool does not function
properly or parts are missing. If unable to do so, have a qualified technician
service the tool.
SNOWMOBILE LIFT
Problem(s)
Possible Cause(s)
Metal on
1.
metal sound
2.
is heard.
Damage to
1.
the lift's
2.
frame.
3.
www.princessauto.com / 1-800-665-8685
Bolts are too tight.
Lubricant required
at contact points.
Cracks in frame.
Rust on frame's
components.
Bent jack base,
swing arm or
frame.
SNOWMOBILE LIFT
Suggested Solution(s)
1.
Loosen bolts a quarter turn and test for smooth
movement.
2.
Loosen bolt slightly and apply grease to the gap
to reduce friction. Retighten the bolt. Move the
component to spread the grease.
When faced with a choice of replacing or repairing
a damaged component, it is better to replace the
component. There may be additional damage that you
are unable to see. Always have a certified individual
conduct repairs and tests to the crane's structure.
1.
Exceeded weight capacity or metal fatigue from
regular use. Disassemble the lift and repair (weld)
or replace damaged components.
2.
Check if rust is only on the surface or if it
has penetrated the metal. Remove surface rust
and repaint section. When rust has penetrated
structure, repair or replace the component.
3.
Exceeded weight capacity or impacted against
a structure. Replace the damaged component. A
straightened component may still be weak and
could fail.
V1.1
Page 10
Publicité
