Publicité
en-us_main.book.book Page 22 Wednesday, August 28, 2024 8:34 AM
22 OPERATION
Shelves
Detaching/Assembling the Shelf
The shelves in the refrigerator are adjustable to
meet individual storage needs.
Adjusting the shelves to fit items of different
heights will make finding the exact item you want
easier.
CAUTION
• Make sure that shelves are level from one side to
the other. Failure to do so may result in the shelf
falling or spilled food.
• Do not clean glass shelves with warm water
while they are cold. Shelves may break if
exposed to sudden temperature changes or
impact.
• Glass shelves are heavy. Use special care when
removing them.
1
To detach, tilt up the front of the shelf and lift
the shelf straight up.
2
Pull the shelf out.
3
To assemble, tilt the front of the shelf up
slightly and guide the shelf hooks into the
slots at the desired height.
CAUTION
• To avoid damage to the multi-duct, do not tilt the
front of the shelf up too high when assembling
or disassembling.
4
Lower the front of the shelf so that the hooks
drop into the slots.
NOTE
Transmitter
a
Receiver
b
• Foreign objects and dirt between the shelf and
the inner cabinet wall could prevent the shelf
light from turning on.
• The shelf light turns on when the door is
opened.
• The shelf light turns off after seven minutes or
when the door is closed.
• Split shelves are left and right specific and are
not interchangeable.
Publicité
