Publicité
en-us_main.book.book Page 19 Wednesday, August 28, 2024 8:34 AM
4
Remove the crisper drawer.
5
Pull the drawer frame out until it stops.
6
Press the release levers
the drawer frame and pull out the drawer
frame.
7
To assemble, extend the rails for the drawer
frame until they stop.
8
Align the edges under the drawer base with
the grooves on each rail, then lower the
drawer base until it clicks into place.
9
With the front slightly tilted up, insert the
crisper drawer and cover into the frame and
push them back into place.
CAUTION
• Make sure that the crisper is level from one side
to the other. Failure to do so may result in the
crisper falling or spilled food.
• Do not clean the crisper glass with warm water
while it is cold. The crisper may break if exposed
to sudden temperature changes or impact.
• The crisper is heavy. Use special care when
removing it.
Freezer Drawers
Removing/Assembling the Freezer
Drawers and Convertible Drawer
on either side of
a
• Use two or more people to remove and install
• Be careful of sharp hinges on both sides of the
• When you lay the drawer down, be careful not to
• Do not sit or stand on the drawer.
• To prevent accidents, keep children and pets
1
2
3
WARNING
the drawer.
drawer.
damage the floor.
away from the drawer. Do not leave the drawer
open.
To remove, pull a drawer open to full
extension.
Push the button to disengage the stopper on
either side.
Lift the front of the basket up, then pull it
straight out.
OPERATION
19
Publicité
