Publicité
7.2 Positioning
Place the refrigerator on a horizontal surface and use the adjustable
feet to level it, if needed.
When positioning moving the refrigerator, be careful not to roll over
or damage the power cord.
When choosing the position of the refrigerator, remember that a gap
of at least 50 mm (2 in.) is required between the back panel of the
refrigerator and any wall in order to allow the warm air from
condensation to escape.
The same gap of at least 50 mm (2 in.) is required between the top of
the refrigerator and any wall above it.
As far as any space requirements at the sides of the refrigerator are
concerned, there are no specific
instructions.
171064.UNI – rev. 06
EN
Publicité
