Publicité
NOTE: together with the refrigerator, also the cup warming shelf (if
present) will be turned ON.
Once turned on, the fridge will start working, but it will take some time
(also depending on external conditions and temperature setting) to
reach the required internal temperature.
We recommend to store the pre-cooled milk inside the refrigerator
approximately 10 minutes after turning it on to achieve the best
results.
Temperature setting
To set the desired temperature, push the button
until you see the
current set point value flashing, then adjust the value using the
button
(to increase) and
(to decrease); to store the new
value press again the button
NOTE: To ensure that the milk is always maintained at temperature
allowed by the HACCP, the setpoint can be varied only within a
specific values range.
Heated shelf for cup warming (if present)
Cup warming shelf is connected to a dedicated ON/OFF switch or to
the electronic thermostat of the refrigerator.
In the first case, push the ON/OFF switch to activate/deactivate the
heaters.
In the second case, hold the
button for 1 second.
171064.UNI – rev. 06
EN
Publicité
