Publicité
In some products, the sensor signal comes out from the refrigerator
(through a connector) and is connected directly to the coffee
machine.
7.5 Defrosting
If the refrigerator is left to operate for very long periods of time, it is
possible for ice to form on its inside walls.
If the ice becomes considerably thick, it is advisable to defrost the
refrigerator, to continue to guarantee good appliance efficiency and
avoid higher electricity consumption.
To defrost the appliance, switch it off; we recommend to leave the
refrigerator door open to speed up this operation.
Never use tools or any type of utensils to remove ice, this could
damage the evaporator, which is in contact with the inside walls of
the refrigerator. The manufacturer cannot accept any liability for
damage to the appliance caused by failure to abide by this
recommendation.
NOTE: During defrosting operation, do not leave the milk container
inside the refrigerator.
At the end of the defrosting operation, after cleaning and thoroughly
drying the inside walls of the refrigerator, switch it on.
7.6 Cleaning and maintenance
Under the current regulations regarding health and safety, the
operator is responsible for the hygiene of food contact materials and
must maintain and clean the unit, preventing the bacteria formation.
171064.UNI – rev. 06
EN
Publicité
