Publicité
CARE & MAINTENANCE
WATER DRAINAGE
When there is excess water condensation inside the unit the appliance will stop running and show "full
tank". This indicates the water condensation needs to be drained by following these steps:
Manual Draining
1. Unplug unit from power source
2. Place a drain pan under the lower drain plug
(image)
3. Remove the lower drain plug
4. Water will drain out and collect in the drain pan
(not supplied)
5. Once water is drained, replace the power drain
plug firmly
6. Turn on unit and run as normal
Drain outlet
Drain cap
Drain pan
Middle Drainage
1. Unplug the unit from power source
2. Remove the drain plug (A)
3. Note: while doing this some residual water may
spill, so please have a way to collect the water
4. Connect the drain hose (B) (1/2" or 12.7mm,
may not be supplied)
5. Water will continue to drain through hose into a
floor drain or bucket
6. Once done, turn unit back on
22
Drain cap
Publicité
